[RouterOS] Ikev2/IPsec VPN設定

 記個備忘錄，免得之後忘了

###設定認證

/certificate

add common-name=ca name=ca

sign ca ca-crl-host=2.2.2.2

/certificate

add common-name=2.2.2.2 subject-alt-name=IP:2.2.2.2 key-usage=tls-server name=server1

sign server1 ca=ca

/certificate

add common-name=rw-client1 name=rw-client1 key-usage=tls-client

sign rw-client1 ca=ca

###Export client certificate (pkcs12 format)

export-certificate rw-client1 export-passphrase=1234567890 type=pkcs12

export-certificate ca type=pem

###Set profile

/ip ipsec profile

add name=ike2

###Set proposal

/ip ipsec proposal

add name=ike2 pfs-group=none

###Set IP pool

/ip pool

add name=ike2-pool ranges=192.168.77.2-192.168.77.254

###Config

/ip ipsec mode-config

add address-pool=ike2-pool address-prefix-length=32 name=ike2-conf

##Policy

/ip ipsec policy group

add name=ike2-policies

/ip ipsec policy

add dst-address=192.168.77.0/24 group=ike2-policies proposal=ike2 src-address=0.0.0.0/0 template=yes

###Peer

/ip ipsec peer

add exchange-mode=ike2 name=ike2 passive=yes profile=ike2

###Identity

/ip ipsec identity

add auth-method=digital-signature certificate=server1 generate-policy=port-strict mode-config=ike2-conf peer=ike2 policy-template-group=ike2-policies

###Firewall

###If this router is VPN server (clients connect to it), then you want (before the last drop in input chain):

/ip firewall filter

add chain=input dst-port=500,4500 protocol=udp action=accept

add chain=input protocol=ipsec-esp action=accept

###VPN clients should access router itself (via encrypted tunnel),

/ip firewall filter

add chain=input ipsec-policy=in,ipsec action=accept

[JQuery] ready is deprecated

以下幾種敘述都可以代表當網頁DOM建置完畢之後再執行

$( handler )
$( document ).ready( handler )
$( "document" ).ready( handler )
$( "img" ).ready( handler )
$().ready( handler )

但根據jQuery 3.0文件說明，只建議第一種方法，因此其餘方法會被標示為deprecated